Get my home cleaned
A man pressure washing a mossy concrete driveway in front of a single storey brick home

Driveway pressure cleaning

Need a driveway pressure cleaner? Hear back within the hour.

Plain concrete, exposed aggregate or pavers. Tell us about your driveway and one verified local pressure cleaner gets in touch.

  • Licence checked and insured
  • Verified by Home Ready Cleaning
  • Matched with a driveway cleaning specialist
Get my driveway cleaned → Collective Google Rating4.8500+ reviews
4.8

From 500+ reviews

Verified byHome Ready Cleaning
Why book here

Checked before they get your job

  • Back within the hourA local driveway pressure cleaner gets back to you within the hour.
  • Licence checkedWe check each business's licence before it gets jobs.
  • InsuredEvery business we pass jobs to is insured.
  • Verified by Home Ready CleaningLook for the badge. Only verified businesses get your job.

"Very prompt, courteous and reliable, the job was done to perfection."

Pressure cleaningGoogle review

"great result, team turned up on time, were reliable and friendly."

Pressure cleaningGoogle review
What you get

What a driveway clean typically covers

Every cleaner works their own way, so confirm the steps when they call. These are the jobs most cleaners list for each kind of driveway.

A cleaner pressure washing a mossy concrete driveway in front of a brick house, with a ute parked in the carport

Plain concrete

  • Moss, algae and grime pre-treated or pre-soaked
  • A spinning surface cleaner over the main area
  • Edges, corners and joins done with a hand wand
  • Tyre marks and dirt lifted with the wash
  • A final rinse and a look over the finish
A cleaner in ear muffs washing an exposed aggregate driveway, with a clean strip down the middle

Exposed aggregate

  • Lower pressure so the stones are not loosened
  • Grime lifted from the gaps between the stones
  • Mould and moss treated before the wash
  • More time and care, so it usually costs more
  • Left clean and dry enough to seal, if you book it
A clean red brick paved driveway leading to a roller garage door and a carport

Pavers and stencilled concrete

  • Lower pressure on pavers and their joints
  • Dirt and weeds cleared from the joints
  • A heads-up if joint sand washes out
  • Gentle washing on stencilled or coated concrete
  • Refilling the joints quoted as an extra
Concrete beside a brick wall, half cleaned, with the dirty side dark and mossy

Stains and marks

  • Oil treated with a degreaser before the wash
  • Hot water on oil and grease, on some jobs
  • Rust treated with a rust remover
  • A second go on stubborn spots
  • A heads-up that old oil may only fade

Sometimes included

On some cleaners' lists and not others. Ask when you book.

  • Mould and moss treatment
  • Oil treatment on one or two stains
  • Hot water for the whole clean
  • The front path and porch with the driveway

Popular add-ons

Typical price range for each.

  • Oil stain treatment, per stain$30 to $300
  • Rust stain treatment$80 to $200
  • Mould and moss treatment$40 to $170
  • Sealing, per square metre$5 to $45

Not part of a driveway clean

These are separate jobs, or are left out of a standard clean.

  • Fixing cracked, crumbling or sunken concrete
  • Re-laying loose or sunken pavers
  • Rust bleeding up from steel inside the concrete
  • Sealing, unless you book it as well
  • Asphalt driveways, which are rarely pressure washed
See other cleans →
Which clean

Clean only, or clean and seal?

Most driveways just need a clean. A sealer is a second step that suits some surfaces more than others, and paved driveways often need their joints refilled.

Most driveways

Clean only

A pressure wash, usually with a spinning surface cleaner, lifts dirt, moss and grime. Oil and rust get a treatment first. A clean usually looks good for about 6 to 18 months before grime and growth return.

Best for plain grey concrete in fair condition
Two steps, often two visits

Clean and seal

The driveway is cleaned, left to dry, then sealed. A sealer slows stains and regrowth. Depending on the product and the number of coats, it lasts about 1 to 10 years before it needs redoing.

Best for exposed aggregate, coloured concrete and oily driveways
For paved driveways

Paver clean and re-sand

Pavers are washed at lower pressure, then the joints are refilled with sand, often a polymeric sand that hardens with water, and usually sealed. It takes longer and costs more than a clean only.

Best for pavers with weeds or empty joints
Is it worth it

What is different about driveway pressure cleaning, and when it is worth it

When it is worth it, what it will not fix and which type to choose.

How driveway cleaning differs from other pressure cleaning

A driveway is hard ground, so it gets a high pressure clean, not the soft wash used on walls and most roofs, and the pressure is set to suit plain concrete, pavers or exposed aggregate. Most of the price comes from the size and the surface, and oil, rust and stubborn tyre stains each need their own treatment and time.

When a driveway clean is worth booking

It is worth booking when moss, algae or grime has built up, or while an oil stain is fresh. Fresh oil usually lifts with a degreaser, hot water and time, but old oil that has soaked deep into the concrete often fades only to a shadow. A clean also comes first if you want a sealer, which goes on once the driveway has dried.

What a driveway clean usually does not fix

A clean does not repair the driveway. Crumbling concrete, stepped cracks, sunken pavers, pooling water and rust bleeding up from the steel inside stay as they are, and fixing them is a separate job.

Clean only, seal or re-sand: how to choose

The surface: plain grey concrete in fair condition usually just needs a clean, while exposed aggregate, coloured concrete and pavers suit a sealer. The stains: a sealer slows stains, so it suits a driveway where oil is a constant problem. The joints: pavers with weeds or empty joints need a re-sand too. The slope: some cleaners warn that a sealer can make a sloped driveway slippery when wet, so ask about it on a steep drive.

Time and price

Estimated driveway cleaning prices

Driveway cleaning is usually priced by the job or by the square metre, so the size and the surface set most of the cost. These are estimates of what to expect. Every business sets its own price.

DrivewayUsual timeEstimated price
Single driveway1 to 2 hours$100 to $400
Double driveway1 to 4 hours$150 to $650
Long driveway2 to 5 hours$200 to $700
Clean and seal1 to 3 days$600 to $3,500

Estimates only, for plain concrete with easy access and normal dirt and growth. A single driveway is often about 30 to 45 square metres and a double about 40 to 80. Exposed aggregate, pavers, oil stains and a steep or tight drive add to it. Every business sets its own price. Estimates checked on 12 November 2026.

What moves the price

Size
Driveways are often priced by the square metre, at about $2 to $12 on concrete and pavers, so a longer or wider driveway costs more.
Surface
Plain concrete is quickest. Exposed aggregate and pavers need lower pressure and more time, so they usually cost more.
Oil and stains
Each oil, rust or tyre stain needs its own treatment and time. Old oil that has soaked in often only fades.
Minimum charge
Most cleaners have a minimum charge of about $100 to $275, so a short driveway may cost close to that minimum.
Access
A steep or tight driveway, no water or power on site, or a home outside the cleaner's usual area can add a surcharge.
Driveway and paths together
Adding the front path and porch in the same visit usually costs less than booking them separately, as set-up and travel are paid once.
Before you book

When you may not need driveway pressure cleaning

Three cases where a driveway clean is not needed or not the right job.

It was cleaned in the last year or so

Some cleaners say a clean on its own looks good for about 6 to 18 months before grime and growth return, and most driveways need one every year or two. If yours was done recently and still looks clean, it can wait.

Only the garage or carport floor is oily

Garage and carport floors are a concrete clean, usually a degrease and hot wash, rather than a driveway clean. Book that instead, and move the cars and anything stored on the floor out before the cleaner arrives.

Only the paths, patio or pool area need it

Paths, patios and pool surrounds are a concrete clean too, priced by the area and the surface. Most cleaners have a minimum charge, so a small path or slab on its own costs more per square metre.

Water rules

Check your local water rules before you book a driveway clean

The water rules for cleaning a driveway differ between the states and territories.

  • In several states the rules differ again by area, water supplier or town. Check yours before you book.
  • In Victoria, drinking water can be used to clean a driveway only in set cases, such as a health or safety hazard or staining.
  • Ask the cleaner how they work within the rules where you live.
Same visit

House wash, roof and after builders cleaning with a driveway clean

When these jobs share a visit, and when they are separate.

House wash

A house wash price usually covers the walls, eaves, fascia and gutter faces, and leaves the driveway out as a separate job. A single driveway is a popular add-on, typically $100 to $400. Adding it to the same visit usually costs less than a separate booking, as set-up is paid once.

Pressure cleaning

Roof clean

With a roof clean, the roof usually goes first, then the gutters, walls and windows, with the paths and driveway last. Spray and grit come off the roof edge during a roof clean, so move the cars away from the house first. Adding the driveway to the same visit usually costs less than booking each on its own.

Pressure cleaning

After builders cleaning

An after builders clean sometimes includes a sweep of the garage and porch, but it leaves out concrete slurry on driveways and paths, which is a different job. If slurry is on the driveway, tell the pressure cleaner when you book. The Victorian Government's water rules allow drinking water to be used to clean a driveway in the course of construction or renovation.

After builders cleaning
On the day

What to expect when the driveway cleaner comes

How a driveway clean usually runs, from set-up to the last rinse.

A cleaner pushing a round surface cleaner across concrete in front of a brick house with a carport

How long it takes

A single or double driveway usually takes 1 to 4 hours, and a long driveway 2 to 5. A clean and seal runs over 1 to 3 days, across more than one visit.

Your outside tap

Many cleaners connect to your outside tap. You often do not need to be home if the tap works, the gates are open and the cars are moved.

Treatment first

Oil, rust and moss usually get a cleaning product first, left for about 10 to 30 minutes to work before the wash.

The surface cleaner

Most of the driveway is done with a round spinning surface cleaner. It avoids the stripes a wand held too close can leave.

Edges and rinse

Edges and corners are done by hand with a wand, then the whole driveway gets a final rinse.

Afterwards

The driveway stays wet for an hour or two. Before any sealer goes on, concrete usually needs 24 to 72 hours to dry.

Questions to ask

What to ask a driveway cleaner before you book

Every business works its own way, so ask what your price covers.

  • Is oil stain treatment in the price, or charged per stain?Some cleaners include treatment on one or two oil stains and others charge for each one, usually about $30 to $300 a stain.
  • Is hot water part of the clean?Hot water for the whole clean is on some cleaners' lists and not others, and some use it only on oil and grease.
  • Are the front path and porch part of the price?Some cleaners do the front path and porch with the driveway and others do not.
  • Will a steep slope or a far tap add to the price?Some cleaners add a small surcharge for a steep slope, steps, a gate or work more than 30 metres from a tap.
  • Which sealer will you use, and how many coats?Both set how long a sealer lasts. Some cleaners say one coat lasts about 1 to 3 years and two coats about 3 to 5.
  • How will you protect the garden beds?A careful cleaner wets down or covers them before any cleaning solution goes on, and rinses the garden edges at the end.
Questions

Driveway pressure cleaning: your questions answered

Straight answers on price, time, oil stains, exposed aggregate, pavers, sealing and water rules.

How much does driveway pressure cleaning cost?As an estimate, a single driveway runs $100 to $400, a double driveway $150 to $650 and a long driveway $200 to $700. Oil stains, pavers, exposed aggregate and sealing add to it, and every business sets its own price. Tell us about your driveway and a local pressure cleaner gets in touch.
How long does a driveway clean take?A single driveway usually takes 1 to 2 hours, including set-up and rinse-down, and a double 1 to 4 hours. A long driveway can take 2 to 5 hours. A clean and seal is usually done over more than one visit, with the concrete left to dry in between.
Will the oil stains come out?Often, but not always. Fresh oil usually lifts with a degreaser, hot water and time. Old oil that has soaked deep into the concrete often fades to a shadow rather than disappearing. Treatment usually costs about $30 to $300 a stain, so ask what result to expect before it starts.
Can exposed aggregate be pressure cleaned?Yes. Most cleaners use lower pressure so the stones are not loosened, and take more time to lift the grime from between them. That is why exposed aggregate usually costs more than plain concrete. Many owners have it sealed after the clean to slow stains and regrowth.
What about a paved driveway?Pavers are washed at lower pressure so the joint sand stays put, and weeds and dirt are cleared from the joints. Some sand can still wash out. Refilling the joints, often with a polymeric sand, and sealing are usually quoted as extras.
Should I seal my driveway after cleaning?Sealing slows stains and regrowth, and suits exposed aggregate, coloured concrete and pavers. It usually adds about $5 to $45 a square metre, and a clean and seal is estimated at $600 to $3,500. On a plain grey driveway, a clean every year or two usually costs less. Ask how long to keep cars off it afterwards.
How often should I clean my driveway?Most driveways need a clean every year or two. Shaded and damp driveways can need it every year, and some twice a year. A clean on its own usually looks good for about 6 to 18 months before grime and growth return.
Can pressure cleaning damage my driveway?It can if it is done badly. A wand held too close can etch stripes into concrete, and too much pressure can loosen aggregate and wash out paver sand. Some mould treatments can bleach coloured concrete. A spinning surface cleaner and the right pressure avoid most of this.
Are there water rules for cleaning a driveway?The rules differ by state and territory.
In NSW, each area follows its own local water rules, and they cover hosing driveways, paths and other hard surfaces. Check your council or water supplier's website for the rules where you live.
In Victoria, permanent water saving rules apply every day. Drinking water can only be used to clean driveways, paths or decks after an accident or emergency, for a health or safety hazard, during building work, or to remove staining once a season, and then with a high pressure cleaner if one is available.
In Queensland, water restrictions differ by region and water supplier. In Brisbane, supplied by Urban Utilities, restrictions are not in place. Seqwater asks people to sweep paths and paving instead of hosing them, and to spot clean for safety, health or emergency reasons with a trigger nozzle hose or high pressure cleaning equipment.
In South Australia, under the Environment Protection (Water Quality) Policy 2015, waste water from high-pressure cleaning must not go into the stormwater system, and a breach can bring a $300 fine. Ask the cleaner to send it onto your lawn or garden, not into the gutter.
In Western Australia, the Permanent Water Efficiency Measures apply statewide and include sprinkler watering rosters. Water Corporation, which supplies Perth, says to use a broom rather than a hose on driveways or paving for general cleaning. High pressure cleaners are not for general cleaning, and can only use the minimum water needed for health and safety cleaning.
In Tasmania, TasWater sets four stages of water restrictions and applies them area by area when supply is short. Check TasWater's water supply status for your area. When a restriction is in place, it applies to all residents, visitors and businesses there, and at every stage hosing or pressure cleaning concrete and other hard surfaces is limited to spot cleaning for safety, health, animal welfare or emergency reasons.
In the ACT, Icon Water's Permanent Water Conservation Measures are always in place in Canberra. You can clean driveways and other paved areas at any time with a bucket and mop or a high-pressure low-volume cleaner. Otherwise water can only be used to clean paved areas after an accident, fire, health hazard or other emergency, using the most water-efficient method reasonably available.
In the Northern Territory, water rules differ by town. In Katherine, compulsory water conservation measures mean no watering of hard surfaces such as concrete or paved driveways and footpaths. Check Power and Water's rules for your town before you book.
Some cleaners collect the dirty wash water instead of letting it run into the street drain, which can add to the price, so ask when you compare quotes.
Is there a minimum charge?Most cleaners have one, usually about $100 to $275, to cover travel and set-up. Adding the front path and porch to a driveway clean in the same visit usually costs less than booking each on its own.
Do I need to be home?Often not. If the outside tap works, the gates are open and the cars are moved off the driveway, many cleaners can do the job while you are out. Agree on this when you book.
Are driveway cleaners insured?Every business we pass jobs to is insured and checked before it gets jobs. It is still fair to ask how they protect windows, paint and plants, and how long they have been in business.
When can I park on the driveway again?After a clean on its own, some cleaners say the driveway stays wet for an hour or two. With a clean and seal, the concrete usually needs 24 to 72 hours to dry before the sealer goes on, and some cleaners say to keep cars off the sealed driveway for at least 24 to 48 hours.
How long does a clean and seal take?It is usually done over more than one visit, with the concrete left to dry in between. Some cleaners allow about 1 to 2 days for plain concrete, and about 2 to 3 days for exposed aggregate, decorative concrete or a paver clean, re-sand and seal.
Can tyre marks be cleaned off?They can be. Some cleaners say the round spinning surface cleaner used for most of the driveway lifts dirt, mould and tyre marks with the wash. A stubborn tyre mark can need its own treatment and time, and sometimes a second go. Show the cleaner where the marks are before they start.
How big is a single, double or long driveway?A single driveway is often about 30 to 45 square metres and a double about 40 to 80. Some cleaners count a long driveway as about 80 to 150 square metres. Driveway cleaning is usually priced by the job or by the square metre, so give the cleaner a rough size when you book.

Ready when you are.

Tell us the job once. One verified local driveway pressure cleaner gets back to you within the hour.

Get my driveway cleaned →

Get a driveway pressure cleaning quote