
How-to guide
How to clean a sisal rug
Clean a sisal rug at home with a vacuum, dry cloths and as little water as you can. Water is the main risk: it can make sisal shrink, stain and warp.
The short answer
Keep it as dry as you can. Vacuum both sides often, along the binding, not across it. Blot spills at once with a dry white cloth, from the outside in, and never rub. Test a hidden corner, then dab any mark with a barely damp cloth and dry it fast with a fan. Never steam clean, shampoo, hose or soak it.
What you need
- Vacuum with a hand tool
- White cloths or paper towel
- A spoon or blunt knife
- A little water
- Baking soda
- A fan
How to clean a sisal rug, step by step
The first two steps are the regular clean. The rest are for a spill or a mark.
- Shake it outside if you can carry itHold it by two corners and shake it hard, without letting it hit anything, then turn it over and shake the other side. If it is too big to carry, vacuum it instead.
- Vacuum the back, then the frontVacuum the underside, flip it and do the top, as grit in the weave wears the fibres. Use suction only, or turn the brush roll off or set it as high as it goes. Run along the binding, not across it, without catching the corners. Do it at least weekly, more where it gets daily use.
- Lift anything solid straight awayDeal with a spill the moment it happens. Scrape up anything solid with a spoon or the dull side of a butter knife, working from the outside of the spot towards the middle.
- Blot with a dry white clothPress a clean, dry white cloth or paper towel onto the spill and lift it off, working from the outside towards the middle. Do not rub, as rubbing pushes the liquid deeper into the rug.
- Test a hidden corner firstBefore anything damp touches a mark, try the same thing on a hidden corner and let that corner dry before you judge it. Sisal can show brownish marks or a change in texture only as it dries.
- Dab the mark with a barely damp clothDampen a white cloth with a little water and wring it out, so the cloth is damp and the rug stays dry. Dab the mark, then blot it with a dry cloth. Before adding soap or vinegar, read the advice on them below.
- Dry it fast, with air underneathPoint a fan at the spot and prop the edges up so air gets underneath. A rug can feel dry on top and still be damp below, so let it dry right through before you use it or put furniture back.
What you need to clean a sisal rug
Everything here is used dry or barely damp.
Vacuum with a hand tool
Strong suction lifts the grit that wears the fibres down. A hand tool or upholstery attachment helps at curled corners and edges.
White cloths or paper towel
Clean, dry white cloths, an absorbent towel or paper towel, to blot up a spill before it soaks into the fibres.
A spoon or blunt knife
A spoon or the dull side of a butter knife, to lift anything solid off the weave before you blot a spill.
A little water
Only enough to dampen a cloth. Sisal fibres soak up water and swell, so the cloth gets damp, never the rug.
Baking soda
Plain baking soda, sprinkled on dry and vacuumed up, freshens a rug that smells. Use it as a dry powder, not a wet mixture.
A fan
A fan keeps air moving over a damp patch, which helps it dry. Prop the edges up so air gets underneath as well.
If mould has grown on the rug
From the Victorian Department of Health's Better Health Channel, on mould in the home generally, not rugs.
Who should stay away
The Better Health Channel says some people should not remove mould or be present while it is removed, including pregnant women, children and people with weakened immune systems or chronic lung diseases.
Do not dry brush it
The Better Health Channel says not to dry brush a mouldy area, as the brush can flick spores into the air where they may be breathed in, and to vacuum it only with a HEPA (high efficiency particulate air) filter.
What not to do to a sisal rug
Water and rough handling do the most harm.
Steam, shampoo or soaking
Never steam clean, wet-shampoo, wash or soak it. Sisal soaks up water and swells, then shrinks and distorts as it dries, and water can leave brown watermarks and mould underneath.
A hose or a hired machine
Do not hose it down, even on a warm day, or use a hired wet carpet-cleaning machine. A dry surface afterwards does not mean the backing has dried.
Bleach and strong cleaners
Keep strong alkaline cleaners, bleach and peroxide off it. Alkaline cleaners can brown natural fibres, and a bleach-like product can leave a pale patch for good.
Scrubbing and stiff brushes
Do not scrub or use a stiff brush. Rough handling can leave the fibres looking frayed, and a scrubbed patch on a flat weave can look worn after the stain has gone.
Where the advice on sisal differs
Each of these could damage the rug, so both sides are given.
Beater bar or suction only
Three guides vacuum with suction only, or with the brush roll off or set as high as it goes, as a beater bar can fray the fibres and pull at the binding. Two use a beater bar or brush attachment.
Mild soap, vinegar or plain water
Three guides add a little mild soap or detergent to the water, and two use equal parts white vinegar and water. Another says vinegar should not be used on sisal. One keeps dishwashing liquid, vinegar and stain removers off greasy or coloured stains, as they can leave residues or discolour it.
A hairdryer or no heat
Two guides dry a damp patch with a hairdryer. One says no hairdryer or heat source at all, as heat can make the rug shrink or warp. Another says not on high heat, and never against a heater.
Looking after a sisal rug between cleans
Habits that keep damp, grit and smells down.
Keep it in a dry room
Lay it where spills are less likely and water does not often reach the floor, so not in a bathroom or laundry, and keep it away from high humidity.
Use a rug pad and turn it
A rug pad underneath reduces wear and tear. Turn the rug around every few months so it wears evenly.
Freshen it dry
For a smell, sprinkle on baking soda, leave it 30 minutes to about an hour, then vacuum it up. For a dull rug, use a dry carpet-cleaning compound the rug's maker or seller recommends, tested on a hidden spot first.
When to call a professional
Call a rug cleaner who has experience with natural fibres if any of these apply.
- A stain will not lift with blottingGreasy, coloured or set stains, and any mark a careful try at home has not shifted, are best left to a professional. More water on the same spot risks a watermark.
- It already has watermarks or ringsOld watermarks and rings need a professional to assess them. Set marks may only be reduced, not fully removed, so ask what to expect before work starts.
- The whole rug looks dull or greyWhen vacuuming is no longer enough, particularly after years of use, ask a professional which method suits the rug's fibre and the way it is made.
- Mould has grown on itThe Better Health Channel says soft furnishings that cannot be put in a washing machine will have to be cleaned professionally. If that is not possible, it says, they may need to be thrown out.
A professional usually checks the fibre, backing and any old watermarks first, then uses a dry or low-moisture method. If a cleaner offers a standard hot water extraction with no mention of the fibre, that is a warning sign for sisal. Rugs are priced by size and fibre. For a medium rug of about 2 by 3 metres, the estimate is typically $60 to $350. Home Ready Cleaning passes your job to one local rug cleaner, licence-checked and insured.
Full details: Rug cleaning
