
Tile regrouting in Perth
Tile regrouting in Perth, from a licence-checked local
Shower walls, the shower floor or a whole tiled floor. Tell us the job and one verified local tile and grout business gets in touch.
- Licence checked and insured
- Verified by Home Ready Cleaning
- Matched with a tile and grout cleaning specialist
From 500+ reviews
Checked before they get your job
- Back within the hourA local tile and grout cleaner gets back to you within the hour.
- Licence checkedWe check each business's licence before it gets jobs.
- InsuredEvery business we pass jobs to is insured.
- Verified by Home Ready CleaningLook for the badge. Only verified businesses get your job.
What a tile regrout in Perth typically covers
Every business works its own way, so confirm the steps when they call. These are the areas and steps that appear on most regrouting quotes.

Shower walls and floor
- Tiles tapped for hollow spots first
- Old grout cut out with an oscillating tool
- Joints cleaned and vacuumed out
- New grout pressed in with a rubber float
- Grout haze sponged off the tile faces

Floors
- Shower floors, where grout usually fails first
- Bathroom, ensuite and laundry floors
- Kitchen and living area floors
- Cracked, crumbling or missing grout replaced
- Usually priced by the square metre

Silicone joints
- Old silicone cut out at corners and the floor edge
- Joints cleaned of old silicone residue
- Wet-area, mould-resistant silicone run in
- Screen, taps and floor waste on some lists
- About 24 hours to cure before the shower is used

Splashbacks and walls
- Kitchen splashbacks
- Bathroom walls outside the shower
- Cement grout is common in dry areas
- Small crack repairs in single grout lines
- A new grout colour, if you want a change
Sometimes included
On some businesses' lists and not others. Ask when you book.
- New silicone as part of a full regrout
- A penetrating sealer on new cement grout
- Sealing around the taps and floor waste
- Mould treatment before the new grout goes in
- A moisture check where a leak is suspected
- A written warranty on the work
Popular add-ons
Typical price range for each.
- Epoxy instead of cement, one shower$100 to $500
- Shower silicone replaced, per metre$8 to $35
- Sealer on new cement grout, per square metre$2 to $12
- Hollow tiles lifted and re-bedded$150 to $400
- Cracked tile replaced, per tile$25 to $50
- Mould treatment$50 to $200
Not part of a regrout
These are separate jobs, often for another trade, or are quoted on their own.
- Repairing the waterproofing membrane
- Leaking pipes, taps and mixers
- Cracked shower bases and trays
- Retiling a shower or floor
- Shower screen seals and glass
- Rotted framing or water damage below
Estimated tile regrouting prices in Perth
Regrouting is priced on the size of the job, often by the square metre, so the area and the grout you choose set most of the cost. These are estimates of what to expect. Every business sets its own price.
| Job | Usual time | Estimated price |
|---|---|---|
| Shower floor only | A few hours | $250 to $850 |
| Full showerwalls and floor, standard size | 4 to 8 hours | $250 to $1,850 |
| Large or double showerwalls and floor | A full day or more | $800 to $2,700 |
| Bathroom or laundry floorabout 10 square metres | 4 to 8 hours | $250 to $900 |
| Kitchen or living floorabout 20 square metres | 1 to 2 days | $500 to $1,700 |
| Re-siliconing one showerno regrout | 1 to 2 hours | $150 to $350 |
Estimates only, for removing the old grout and regrouting sound ceramic or porcelain tiles in cement or epoxy grout. Mosaic tiles, natural stone, hollow tiles and leak repairs cost more. Every business sets its own price. Estimates checked on 12 November 2026.
What moves the price
- Size of the job
- Regrouting is often priced by the square metre, and published rates run from about $25 to $85. A bigger shower or floor means more grout to remove and replace.
- Tile size
- Small and mosaic tiles have far more grout lines per square metre than large tiles, so they take longer. Very narrow or very wide joints add time too.
- Cement or epoxy
- Epoxy grout costs more and takes more skill to apply, so it usually adds about $100 to $500 to a shower. It does not need sealing and tends to last longer.
- The old grout
- All the old grout has to come out first. Hard, well-bonded grout takes longer to remove, and mould or large missing sections add preparation.
- Hollow or cracked tiles
- A hollow-sounding tile has to be lifted and re-bedded before the joints around it are regrouted, which often adds $150 to $400. Cracked tiles are replaced at extra cost.
- Silicone and extras
- Many full shower jobs include new silicone in the corners and along the floor edge. Ask whether sealing around the taps and floor waste is in the price.
Cement grout, epoxy grout or just the floor?
Three common ways to book a regrout in Perth. Ask which grout each quote uses, because it changes the price and how long the result lasts.
Cement grout
Cement grout is the usual lower-cost choice and suits walls and dry areas such as splashbacks. It is porous, so in a shower it needs a penetrating sealer, and it usually lasts about 5 to 10 years there.
Epoxy grout
Epoxy does not soak up water, soap and stains the way cement grout does, and it does not need sealing. It costs more and sets fast, so it takes more skill to apply. It often lasts 10 to 15 years or more.
Shower floor only
The shower floor stays wet longest, and its grout usually fails before the walls. If the wall grout is still sound, regrouting just the floor, often in epoxy, costs less than doing the whole shower.
What to expect on regrouting day
How a regrouting visit usually runs, from the first check of the tiles to the wait before the shower is used again.

How long it takes
A standard shower usually takes 4 to 8 hours, so most are finished in one day. Silicone replaced on its own takes 1 to 2 hours.
A check first
Many regrouters tap the tiles for hollow spots and check the grout before they start. A hollow tile has to be re-bedded before the joints around it are regrouted.
Old grout out
The old grout is cut out with an oscillating tool, ideally to the full depth of the joint, and the joints are vacuumed. New grout laid over old grout tends to crack and lift.
New grout in
Fresh grout is pressed into the joints with a rubber float and the haze is sponged off the tiles. Epoxy starts to set in about 30 minutes, so it takes quick, careful work.
Silicone last
Once the grout has set, the corners and the floor edge are filled with mould-resistant silicone. These joints move a little, so they get silicone instead of grout.
Keeping it dry
Plan for the shower to be out of use on the day and for 24 to 48 hours after. Keep it dry, with no steam, and skip harsh cleaners for about 72 hours.
Six things that get you a better regrout
A little prep means the visit goes on your grout, not on moving things or working out details.
- Send photosSend a photo of the whole shower or floor and a close-up of the grout. Some regrouters give a fixed price from photos.
- Measure the areaFor a floor, measure length by width. For a shower, note its size. About 1 metre by 1 metre is usually treated as standard, and larger showers cost more.
- Mention any leakSay if there is a stain on the ceiling below, a musty smell or water outside the shower. The cause may need checking before a regrout is booked.
- Plan another showerWork out where you will shower for a day or two. The regrouted shower has to stay dry, with no rinsing or steam, while the grout and silicone cure.
- Clear the showerTake bottles, mats and caddies out of the shower and off the floor. If you have a second bathroom, move towels and toiletries there first.
- Compare like with likeAsk each business which grout it will use, cement or epoxy, and whether new silicone and sealing are in the price. Then compare the quotes.
Tile regrouting in Perth: your questions answered
Straight answers on price, epoxy, curing, silicone and when a leak needs more than new grout.
How much does tile regrouting cost in Perth?
As an estimate, regrouting runs $250 to $850 for a shower floor only, $250 to $1,850 for a standard shower, walls and floor, and $250 to $900 for a bathroom or laundry floor of about 10 square metres. Epoxy usually costs more than cement, and hollow tiles or leak repairs add to the price. Every business sets its own price. Tell us the job and a local tile and grout business gets in touch.How long does regrouting take?
A standard shower usually takes 4 to 8 hours of work, so most are done in a day. Plan for the shower to be out of use for another 24 to 48 hours while the grout cures. Replacing the silicone on its own takes 1 to 2 hours, plus about 24 hours to cure.When can I use the shower again?
Usually after 24 to 48 hours. Published times for epoxy run from about 18 to 48 hours, so use the time your installer gives you. New silicone needs about 24 hours, and longer in humid weather. Avoid harsh cleaners on the new grout for about 72 hours.Should I choose epoxy or cement grout?
For a shower floor, many regrouters recommend epoxy. It does not soak up water and stains the way cement grout does, needs no sealing and often lasts 10 to 15 years or more. Cement grout costs less and suits walls and dry areas, but in a shower it needs sealing and usually lasts about 5 to 10 years.Will regrouting fix my leaking shower?
Only if water gets in through cracked grout or old silicone. A leak from a pipe, the shower base or the waterproofing membrane under the tiles needs other work, so get the cause checked. In Western Australia, apart from a few basic tasks such as repairing a tap or replacing a shower head, all water supply, sanitary and drainage plumbing work must be done by a licensed plumber or permit-holder. Most building work valued at $20,000 or more that needs a building permit must be done by a registered builder.Can new grout go over the old grout?
It is not the usual way. Most regrouters remove the old grout first, because new grout laid over old has nothing solid to bond to and tends to crack and lift within months. If a quote looks very low, ask whether the old grout is being removed or covered over.Do I need new silicone as well?
Often, yes. Silicone fills the corners and the floor edge, where tiles move a little, and published figures put its life at about 2 to 10 years. Mould under old silicone stays until the silicone is cut out. Re-siliconing a shower on its own often costs $150 to $350.Do I need a regrout or just a clean?
Regrout if the grout is cracked, crumbling or missing, scrapes away with a fingernail, or grows mould again within days of a good clean. If the grout is solid but dirty, a tile and grout clean is the cheaper fix.What if some tiles sound hollow?
A tile that sounds hollow when you tap it has lost the bond behind it, and new grout around it will crack as it moves. It has to be lifted, re-bedded and left about 24 hours before the regrout, which often adds $150 to $400.Can a tiled floor be regrouted, not just a shower?
Yes. Bathroom, laundry and kitchen floors are regrouted the same way and are usually priced by the square metre, at about $25 to $85. Cement grout usually takes 24 to 48 hours to cure, so ask when the floor can be walked on.Does new cement grout need sealing?
Usually, yes. Cement grout is porous, so a penetrating sealer goes on once it has fully cured, usually after about 72 hours. It typically adds about $2 to $12 a square metre. Epoxy grout does not need sealing.Are regrouting businesses insured?
Every business we pass jobs to is insured and checked before it gets jobs. It is still fair to ask which grout and silicone they will use and what their warranty covers.More near you
Other jobs in Perth
- House cleaning in Perth
- After builders cleaning in Perth
- Airbnb cleaning in Perth
- Bond cleaning in Perth
- Carpet cleaning in Perth
- Couch cleaning in Perth
- Curtain and blind cleaning in Perth
- Mattress cleaning in Perth
- Oven cleaning in Perth
- Pressure cleaning in Perth
- Rug cleaning in Perth
- Tile and grout cleaning in Perth
- Window cleaning in Perth
- Deep cleaning in Perth
- NDIS cleaning in Perth
Tile regrouting in other states
Tile and grout cleaning guides
Official sources
Details were checked on 12 November 2026.
- Building and Energy (LGIRS), Plumbing work in your home
- Building and Energy (LGIRS), Building or renovating your home

Ready when you are.
Tell us the job once. One verified local tile and grout cleaner gets back to you within the hour.
Get my tiles cleaned →